Perel EFL91 Manual Del Usuario página 3

5. Operation
Mounting:
The LED flashing light has a triple Installation Mode:
You can mount it on a metal surface via the built-in magnets, as well as on
any smooth surface via the suction cup.
On rough surfaces, you can also mount the flashlight with 3 screws. The
mounting holes are 3 mm in diameter.
Operation:
The LED flashing light with USB connector has 1 mode flashing mode and
cannot be changed. The LED blinker starts up as soon as the USB connector
receives power.
Connection:
There is a standard USB-C connection and a USB-A to USB-C conversion
plug is also included. This allows you to connect it to a classic USB-A
connector as well.
6. Technical Specifications
Depth unit
Height unit
Width unit
Weight Unit
Material
Input voltage rating VDC
USB type
Usage location
IP rating
Operating temperature range
Diameter lantern
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.perel.eu.
The information in this manual is subject to change without prior
notice.
V. 01 – 11/09/2023
EFL91
160 mm
128 mm
160 mm
600 g
ABS
5 V
USB-C, USB-C to USB-A converter
Indoor & outdoor
IP56
-20-60 °C
160 mm
3 ©Velleman Group nv