Sanyo DS13390 Manual Del Propietário página 5

REMOTE CONTROL
INSTALLING BATTERIES
(2
AAA not
included)
1. Remove the battery cover by pressing the tab and tilting the
cover upward, insert batteries. Make sure you match t_/O
signs on the batteries with marks inside the remote control.
2. Replace battery cover. The remote control is ready!
Notes:
- Do not mix old batteries with new ones or mix different types of
batteries together.
- Remove the batteries if the remote control will not be
used for a month or more. Weak batteries may leak and
cause damage. (Normal battery life is roughly six
months.)
REMOTE CONTROL KEY FUNCTIONS
Point t owards IV
@ ME.O .oo, L __@
@--
@-- --O
(_ VGUIDE
%
IMPORTANT NOTE: Spent or dis-
hargedbatteries must be recycled orI
isposed of properly in compliance
ith all applicable laws. For detailed I
information, contactyour localCounty
olid WasteAuthority. l
@Channel (CH _'1_ )
and
Volume (VOL
0/@)
Keys
Press to scan through the channels in
memory or to adjust the volume.
Mute Key
Press once to minimize the volume. Press
again to restore.
@Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to select
channel 6. For cable channels 100 through
press and hold the 1 key until CI---
QuickTnps
• Point the remote
control toward the TE
Objects between the
remote control and the
TV may cause mis-
operahan of remote
controlJimction.
1• Frontpanel keys work
like remote control
I
i key_.
l • Be sure batteries are
i installed correctly.
[ • Thi_ remote control
i has glo'a-m-the-dark
i Powez Channel and
j Volume keys.
! • Cannot select channel
with number k_s.
Press "0" in Jhmt r)/"
numbers i _ 9.
Example: Channel 05.
i • The "C" infbont of
the number on your
screen indicates a
cable channel.
• Acljusting the volume
level: Right flashing
arrow indicates
appears. Then press the other two numbers. . volume is increasing
and lefi flashing
Caption Key (See page 10.) i arrow indicate_
E
V-Guide Key (See pages 7_9.) i
volume
is decreasing.
• Channel number
Reset Key I will not display
Press this key twice to restore factory set- continuously when
tings, The TV will automatically staff captioning is on.
Channel Search and clear all customized I
Using V-Guide
settings. (See page 9.) TVParental Guide-
I
Power Key
Press to turn TV on or off.
(_)Menu Key
Use this key with the_/_and
_/@ keys to navigate and adjust (_)SleepKey
features of the on-screen menu system
(see pages 6 and 7). Use this key with the "0" key to set the
Sleep Timer (see page 9).
Recall Key
Select a channel then select another using the
number keys. Press Recall to switch
between the channels.
Display Key
Press once to display the Channel numbel:
Press twice to display the channel number
continuously. Press again to remove the
display.
lines settings can be
changed only lLv using
the Renu)te Control
(See pag_ 8 and 9.)
Need help?
visitour website at
• www.sany0ctv.com
E or
E Call 1-800-877-5032
................................... i