GE PP945 Serie Manual De Instrucciones página 6

Usingthe surface elements.
Yournew Profile Cooktop makes an eloquent statement of style, convenience, and kitchen planning flexibility, Whether you
chose it for its purity of design, assiduous attention to detail, or for both of these reasons--you'll find that your Profile
co&top's superior blend of form and function will delight you for years to come,
Thetouch controls give you precise control of the surface elements, Youcan quickly switch between a steady low heat
and full power or any setting in between. Theinformation on the following pages will help you operate and maintain your
cooktop properly,
NOTE:Throughout this manual, features and appearance may vary from your model
_ SURFACE
Never cook directly on the glass.
Always use co&ware.
Always center flTepan on the surface
element you are using.
About the radiant surface elements...
The radiant cooktop lbamres heating
elements beneath a smooth glass suHime.
Cooktop temperatures increase with
the munber of stlrJitce elements that
are on. With 3 or 4 elements turned on,
cooktop temperatures are high. _Mways
use caution when touching it.
The indicator lights will come on
next to the Dual and TH-Ring burnei_
when acfix;tted. I,ights also activate fiw
the Control I,ock feature when it is
turned on. The indicator lights will
go offwhen the surtiice element or
feature is turned ofl_
The appropriate HOTSURFACE indicator
light will ,gl°_ xd_en its corresl)ondino
,_,AGGI.G %
radiant element is turned on and will
NOTE"
Do Rot slide eookware across the
controlor cooktopsurfacebecause
it canscratchthe glass.Theglassis
scratch-resistant, n otscratchprooL
Hot surfi_ce indicator light will:
_Ji:_ Come on whenthesurfaceelement i s
turnedon.
_: Stayonevenafter thedementis turnedoff.
_ Glowbrightlyuntil theelement h ascooled
below 150°£
NOTE: A slightodorIsnormalwhena new
cooktop is usedfor thefirst time.It iscaused by
theheatingofnewpartsandinsulating materials
andwi//disappear i n a shorttime.
It is sale to place hot cookware (fl'om
the oven or surli_ce)
on the glass cooktop
when the surfilce is cool.
Novorplaco
cookware on the control area.
Even alter the surti_ce elements are
turned oH, the glass cooktop retains
enough heat to continue cooking. To
avoid overcooking, i'elllOVe l)_lllS l_i'Olil
the surlace elements when the toed is
cooked. Avoid pladng utensils that could
become hot or plastics that could melt
on the surti_ce element until it has cooled
compleml>
_: Waterstains (mineral deposits)are removable
using the c/eanlbgcream or furl strength white
wbegar
;;Ji:_ Useof window cleanermay leave an
iridescent film on the cooktop. Thecleaning
cream will remove this d_scoloration.
_; Don'tstoreheavy itemsabovethecooktop.
If theydropontothecooktop, t heycancause
damage.
;;_:_ Donotusethesurfaceasa cuttingboarcL
Radiant Surface Elements
The controls for the radiant surfi_ce
elements allow tot 11 different heat
settings: Ixm; 1-9 and High. The heating
element may not visibly glow at low heat
settings.
The suHilce heating element will cycle on
and ely to illaintain VOl.li"
selected
control
setting.
Each radiant surti_ce element has a
temperature limiter which protects the
glass cooktop fl'om getting too hot.
6