GE PP945 Serie Manual De Instrucciones página 8

Usingthe surface elements.
3N/OFF
Warming Zone Surface Element (onsome models)
To ttlYn on tile _g}lIllliIlg zone Stli_iice
element:
Useonlycookware recommended fortop-of-range
cooking.
[] Touch the wamfing zone
ON/OFF
pad, then touch tile (4}/(-)pad.
[] Lrse the (÷}/(-)pad to choose a
setting of H (High) or I, (i,ow).
To mrn off the wamfing zone surti_ce
element, touch the ON/OFF pad.
FoodType Control S etting
Breads/Pastries L (L 0 W)
Sauces L (LOW)
Soups (cream) L (LOW)
Stews L (LOW)
Vegetables L (LOW)
HotBeverages H (HIGH)
Soups (liquid) H (HIGH)
Thechartaboveshowsinitialsuggested settings
only Thetemperature, typeandamountof food,
andthetimeheld will affectthequafityof the
food
The WARMING ZONEwill keep hot,
cooked fi)od at se_wing
telnperature.
_dwavs start with hot toed. Do not use to
heat cold food. Placing uncooked or cold
foodon thewarmingzone couldresultin
foodbome illness.
For best
results, all fi_od on the
WARMINGZONE
should be covered with
a lid or aluminum foil. X,\]/en w;mning
pastries
or breads,
the cover should be
vented to allow i/loisttli'e to escape.
/_dwavs rise potholders
or oven
mitts when
removing food fl'om the WARMING ZONE
as cookware and plates will be hot.
A hot surfhce indicator light will glow
when tile glass smti_ce is hot and will
remain on until tile surtilce has cooled
below 150°E
CAUTION: D onotwarmfoodon the
WARMING ZONEformorethantwo hours.
Donot use p/ast/? wrap to cover food P/ast/?
may melt onto the surface and be very diffl?ult
to remove.
Error During Operation
If an error occurs in the control
operation, tile cooktop operation will
discontinue and tile trait will shut
down completel>
To correct:
[] Atteml)t to set tile c(mtrol to tile
desired cooking setting.
[] _Mlow tile cooktop to cool
completely.
_] _Mter the cooktop cools, attempt to
set the control to the desired
cooking setting.
[] If tile cooktop will not operate, turn
off tile cooktop power at tile circuit
breaker or fllse box lot one ii/intlte.
_] _Mter one minute, turn on tile
cooktop power at tile breaker and
again attempt to set tile control to
the desired cooking setting.
[] If tile cooktop fidls to operate, call
for service.
8