Publicidad
Idiomas disponibles
Idiomas disponibles
3. ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor
chassis and secure with retainer spring.
4. Repeat on opposite side of tractor.
7. Insert
end of link (E) into hole in front
mower
bracket
(H) and secure
with
washer
and retainer spring (J),
5. ATTACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position stot
in link assembly over pin (D) on rear
mower bracket and secure with washer
and retainer spring.
8. Hookend
of clutch cable spring (Q) into
hole in idler arm (R).
9. Push clutch cable housing guide (P) into
bracket, slide collar (L) onto guide and
secure with retainer spring (K).
10. Install belt onto engine pulley (M) and beft
keepers (G),
6. ATTACH FRONT LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly through front hole in tractor
front suspension bracket (F).
IMPORTANT: Check belt for proper routing
in all mower pulley grooves,
11. Raise attachment lift lever to highest
position.
t2. If necessary, adjust gauge wheels before
operating mower as shown inthe Opera-
tion section of this manual.
%
22
08042rex
Publicidad
