Publicidad
ALTUNA ACB20
ALTUNA ACB20
Functional
model
Waiting
Waiting
Activate
Cut
Trigger
Projector
Hold on hold
Automatic
standby
Automatic rest
Raising the alarm
Dear user:
Thank you for choosing this product, we develop and manufacture high
quality products according to customers' requirements. Our products con-
tinue to show excellent reliability in extreme working conditions, but also
represent superior service quality. Our professional salesmen are committed
to answering questions about product support service.
Thank you very much for your confidence in this product! We wish you a
happy use!
Description
Press the button to start until you hear the beep, the power
indicator lights up, and it enters standby mode.
In this case, the start-up function is required.
Press the trigger twice in succession and release it so that the
blades open automatically to their maximum.
When the trigger is pulled with the finger, the blade
performs the complete circuit.
When the trigger is released, the blade opens, the trigger
stops and the blade stops.
Press the ignition switch to turn the light on, then press the
ignition switch to turn the light off.
The trigger is pulled for 6s, the beep sounds and it
enters standby mode.
60 seconds without cutting, the machine goes into "standby".
After 10 minutes in standby mode, it automatically goes into
hibernation mode.
If the scissors have problems, it stops and a beep sounds.
18
EN
Publicidad
