Publicidad
ALTUNA ACB20
PACKAGING OPERATION
1. Press the trigger for a long time, release it and the blade will lock
2. Switch off the power and remove the battery.
3. Sorting, cleaning and packaging
BATTERY CHARGING
Plug in the TYPE-C charging connector, the green light on the
power display will turn on in about 3.5 hours.
Power and battery level indicator light.
REPLACING THE BATTERY
Remove the battery cover and replace it according
to the positive and negative indicator on the battery cell.
ISSUES REQUIRING ATTENTION
1. It is normal for the charger and battery to become slightly warm during charging.
2. If the scissors are not used for a long period of time, they should be recharged once every
3 months to delay the service life.
3. Do not charge the battery repeatedly after a short period of operation, as this may reduce
the operating time and efficiency of the battery.
4. It is strictly forbidden to operate the electric mower during the charging process.
5. Do not store the shears in a damp environment.
22
EN
Publicidad
