Box content (Appendix 1)
1.
Cirrus X Handheld Steamer
2.
Steaming Pad
3.
User manual
Features (Appendix 2)
1.
Limescale traps
2.
Steam button
3.
On/off switch
4.
Stainless steel front plate
5.
Visible water tank
6.
Hanging loop
Limescale traps
To prolong the lifetime of Cirrus X Handheld Steamer, it
is equipped with limescale traps that minimize the risk of
limescale clogging the steamer.
Steam button
Press the steam button to release steam. This button controls the
steam output, which helps the water to last longer.
On/off switch
The on/off switch allows you to turn the steamer on and off
while it is plugged in. Always shut it off manually since it does
not have an auto shutdown function.
Stainless-steel front plate
The stainless-steel surface has been designed to enhance the
process of smoothing out wrinkles.
Visible water tank
The 85 ml water tank is translucent, so you can see the water
level while steaming in order to know when you need to refill
water.
Hanging loop
Cirrus X Handheld Steamer can be hung on a hook or hanger
by using the hanging loop.
Water and water quality
Even though Cirrus X Handheld Steamer has limescale
traps, it is important to use the right water in your steamer
to prolong its lifespan. Cirrus X Handheld Steamer works on
regular tap water, but make sure the water you are using
is soft. If you live in a region with hard water, or if you are
traveling and feel uncertain about the tap water quality,
don't use tap water.
We recommend:
•
Soft tap water
•
Steamery's Steam Water
•
Bottled or filtered still water
(i.e., water meant for drinking)
•
Distilled water
•
Deionized water (also known as battery water)
•
Unscented ironing water
Scan the QR code to
purchase Steam Water.
We DO NOT recommend:
•
Hard tap water
•
Liquids other than water
User instructions (Appendix 3)
Preparations
User manual
1.
Remove the magnetically attached water tank by
pulling it towards you.
2.
Gently lift the silicone plug on top of the water tank and
fill it with water.
3.
Close the water tank with the silicone plug and put the
water tank back in the steamer.
Operating instructions
1.
Plug the cord into a power outlet, then press the on/
off switch.
2.
Wait for 20 seconds. As soon as the red light turns
white, the steamer is ready.
3.
Start steaming.
How to steam (Appendix 4)
Place your garment on a hanger and move the front plate
against the fabric while pressing the steam button. Do not use
the steamer for more than 30 minutes continuously. If you wish
to use your steamer for more than 30 minutes, let it cool off for
one hour in between uses.
1.
Steaming from the outside
Grab the bottom of the garment and press the steamer
against the fabric.
2.
Steaming from the inside
Place the steamer on the inside of your garment, with
the front plate towards you. Slowly move the mouthpiece
against the fabric.
3.
Use the Steaming Pad
Use the Steaming Pad to press the fabric against the
steamer. This tool is great for steaming details like
collars, cuffs, pockets, and hems.
Travel with Cirrus X Handheld Steamer
Cirrus X Handheld Steamer is a great travel accessory that
will keep your clothes wrinkle-free and fresh when you need to
wear a limited wardrobe for days on end. But there are a few
things to keep in mind.
Check the voltage and frequency of your destination
Before traveling with your steamer, it is important to check
the voltage and frequency standards for your destination.
Our steamers are produced with the appropriate voltage and
frequency for the market where they are sold and should
therefore never be used in a country where the voltage does
not correlate with the steamer's capacity.
Find out if you need to use an adapter
Research if you can use the same plug in your destination
country. If the plug is different, you need to use a travel adapter.
To be clear, a travel adapter is useful only if the voltage and
frequency are right.
Safety instructions
READ THE FULL MANUAL BEFORE USING YOUR STEAMER.
When operating the steamer, and especially if children are
present, safety precautions should always be taken. Danger
– your steamer is always electrically live when it is plugged in.
To reduce the risk of death or injury caused by electric shock
always follow these safety instructions:
•
Unplug the steamer when you refill the water tank or
when cleaning it.
•
Do not keep the steamer where there is any risk of it
falling into water.
•
Do not pull the power cord to remove the plug from the
3
EN