Walser 16766 Instrucciones De Uso página 9

pain-relieving medication or alcohol) and other vulnerable people who are unable to react to overheating.
→ Do not use the heated seat pad on parts of the body which are inflamed, injured or swollen. If in doubt,
refer to a doctor. Otherwise, inflammation, injury or swelling can worsen.
→ Make sure that you or someone else do not fall asleep while the heated seat pad is in operation. If the
device is used for a longer period of time, the slide switch must be set to the "LOW" position.
Notice
Risk of damage!
Improper handling of the seat pad can lead to damage of the seat pad.
→ Do not use blankets, pillows or covers on the heated seat pad.
→ Do not bring the power cable into contact with hot parts.
→ Never expose the heated seat pad to high temperatures (heating, etc.) or the influence of weather (rain, etc.).
→ Never immerse the heated seat pad in water to clean or use a steam cleaner for cleaning.
→ Do not use the heated seat pad if it has cracks or fissures or is deformed. Replace any damaged compo-
nents only with matching original spare parts.
→ Do not insert needles or pointed objects in the heated seat pad.
→ To avoid overheating, do not operate the heated seat pad near to heat sources, open flames such as cand-
les, or in direct sunlight.
→ When operating, ensure that the 12V plug is firmly plugged into the 12V vehicle power outlet and it is
free from dirt. In the case of insufficient contact between the plug and 12V vehicle power outlet, the vehicle
vibration can lead to the power supply switching on and off for short intervals. This can lead to overheating.
→ Do not switch on the heated seat pad when folded or in a pushed-together condition.
→ Do not place heavy objects such as suitcases on the heated seat pad.
4.3 Checking heated seat pad and scope of supply
Notice
Risk of damage!
The heated seat pad can be easily damaged if you carelessly open the packaging with a sharp knife or other
sharp object.
Therefore, follow these steps very carefully when opening the packaging.
1. Take the heated seat pad from the packaging and check whether the pad or individual parts are damaged.
If this is the case, do not use the heated seat pad. Consult the manufacturer.
2. Check whether the delivery is complete.
5. Use
Warning
Risk of injury!
Improper handling of the heated seat pad may cause personal injury and damage to the heated seat pad.
→ Before operating make sure that the 12V plug and the power cable are dry.
→ Turn off the heated seat pad immediately with any pain.
→ Do not bend or fold the heated seat pad and keep it away from water and other liquids.
→ Do not use the heated seat pad near open flames or other heat sources such as strong sunlight.
→ Check for wear and damage of the heated seat pad regularly. If such signs are present, or the heated seat
pad has been used improperly or stops working, do not use it any longer. Return the heated seat pad to the
merchant.
→ The device's cable and control unit can cause a risk of entanglement, strangulation, tripping or stumbling if they are
not arranged correctly. The user must therefore ensure that protruding parts and electrical cables are arranged in a safe
manner. This device is not intended for use in hospitals.
5.1 Fixing the heated seat pad
Warning
Risk of injury!
Improper installation of heated seat pads may result in injury.
→ Fix the heated seat pad and the power cable so that the driver's freedom of movement is not restricted.
1.Place the heated seat pad
2. Be sure to check that the heated seat pad does not cover any airbag and restricts it as a result.
3. Attach the heated seat pad with the fastening straps
4. Fix the heated seat pad by anchoring the tightening straps
5. Make sure that the power cable is never pinched.
5.2 Operating the heated seat pad
Use heated seat pad only with the engine running.
1. Plug the 12V plug nto the 12V vehicle power socket.
7
2. Now select the desired heating level, by setting the slide switch
power LED will light up.
3. Turn off the heated seat pad by setting the slide switch to „OFF".
4. Then unplug the 12V plug from the 12V vehicle power socket.
on the car seat.
3
on the backrest of the car seat.
4
and fastening hooks
5
either to „LOW" (35-45°C) or „HIGH" (40-50°C). The
2
to the seat surface.
6
9