Descargar Imprimir esta página

PRIXTON DANCE BOX Manual página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Figure description
1.ON/OFF button/TWS connection/Mode Switch
2.Function Key: Play/Pause, Answer/Hang up/Last number redialing/ LED light mode
switch
3.Microphone
4.Type C charging port
5.Micro SD card slot
6.Indicator light
7.Function Key: Volume increase/Next song
8.Function Key: Volume decrease/Previous song
9.Aux in
Operation
1.Long press ON/OFF button until the LED light indicator starts flashing.
2.Active bluetooth connectivity in your device, which you want to connect with the
speaker.
3.Search for a new device, choose the speaker "DANCE BOX PRIXTON" on the list.
4.Connect with the speaker( enter password 0000 if required).
5.When sounds with a voice message, the speaker is connected successfully, and blue
light is always on.
Note: Portable speaker will connect to the last paired device automatically.
TWS connection
1.Activate two portable speakers.
2.Press twice turn on/o button on one of the speaker until you hear a sound indicator. At
this time, blue light starts flashing.
3.Release the turn on/o button. Connection of two speakers may take several seconds.
4.Activate bluetooth function in the device, select "DANCE BOX PRIXTON" speaker name
from the list and pair the devices. After paired successfully, blue light of main speaker
flashes, other speaker blue light is always on.
Press twice turn on/o button to disconnect TWS connection.
Functions
1. When playing music, short press
for pause or play. Long press
to switch light mode
when speaker turns on.
2. Long press +/- key for next song or last song, short press +/- key for volume increase or
decrease.
3. For incoming call, short press
for answer/end a call, long press
2s to reject an
incoming call. Press
twice to call last dialed number.
4. Short press
key for mode change: BT- TF-AUX.
5.Press +/- together to disconnect bluetooth pairing.
Charging
Connect charging cable to portable speaker's Type C port, red light flashes indicates
charging status, light will turn o when fully charged.
Tips
Turn the portable speaker o when not in use to save power or for storage. To ensure long
term performance of battery, please avoid using product under high temperature, and do
not use portable speaker when charging.
6

Publicidad

loading