Black and Decker LSW20 Manual De Instrucciones página 9

CLEANING AND STORAGE
,'i', C AUTION: Do NOTPOUROR SPRAYWATER
ON THE UNIT.
Use only mild soap and a damp cloth to clean the unit. Never let
any liquid get inside the unit; never immerse any part of the unit
into a liquid.
Your sweeper should be stored in a dry place. Do not store the unit
on or adjacent to fertilizers or chemicals. Such storage can cause
rapid corrosion of the metal parts.
Problem Possible Cause
• Unit will • Battery not installed
not start, properly.
• Battery not charged.
• Battery will • Battery not inserted
not charge, into charger.
• Charger not plugged in.
• Surrounding air tempera-
ture too hot or too cold.
Possible Solution
• Check battery
installation.
• Check battery
charging
requirements.
• Insert battery into
charger until green
LED appears.
• Plug charger into a
working outlet. Refer
to "Important Charging
Notes" for more
details.
• Check current at
receptacle by plugging
in a lamp or other
appliance.
• Check to see if
receptacle is
connected to a light
switch which turns
power off when you
turn out the lights.
• Move charger and
tool to a surrounding
air temperature of
above 40 degree F
(4.5°0) or
below 105 degree
F(+40.5°0).
For assistance withyour product visit our website
www.b ackanddecker.com for the location of the service center nearest
you or call the BLACK & DECKER help line at 1=800=544_986.