Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
3
Testing the push button and
doorbell
NOTE: Do not permanently mount the push button until
the push button and doorbell are working properly.
NOTE: The push button and doorbell come synced from
the factory. The range of the wireless doorbell can vary
with location, temperature, and battery condition.
Temporarily position the push button (B) where
it will be mounted.
Press the push button (B) to verify the
doorbell (A) and push button (B) work properly.
4
Mounting the push button
NOTE: Remove material in screw holes (if needed) before
mounting with screws.
Use either screws (AA) or double-sided tape (BB) to
mount the push button (B).
To mount with screws (AA), remove the back
of the push button (B) by pushing in the tab on
the bottom with a small screwdriver. Place the
push button back on the door jamb and mark
the two screw holes. Drill two 1/16 in. pilot
holes. Attach with screws (AA) and snap on the
front of the push button (B).
Operation
1
Downloading the Hubspace™
app
Download the Hubspace™ app from the App Store or
the Google Play Store.
If the doorbell (A) does not sound, move the
doorbell (A) closer to the push button (B) and
test again.
B
When attaching the push button (B) with
double-sided tape (BB), remove the paper from
both sides of the double-sided tape (BB) and
apply to a clean surface.
AA
5
Please contact 1-877-592-5233 for further assistance.
A
HOMEDEPOT.COM/HUBSPACE
Publicidad
