Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (continued)
7
Muting the doorbell
NOTE: The doorbell muting can also be adjusted on the
home screen using the speaker icon on the doorbell icon.
NOTE: If the doorbell is muted and access to the app to
unmute it is not possible, the doorbell can be unmuted by
pressing either of the volume buttons on the side of the
doorbell.
8
Scheduling a mute event
NOTE: Manually muting or unmuting the doorbell will
override any scheduled muting event.
The doorbell (A) can be scheduled to mute at speci c
times throughout the day or week.
9
Adding a push button
NOTE: This doorbell is designed to work with up to 16
wireless push buttons (sold separately).
10
Removing a push button
Using the app – Select the doorbell and the
desired push button in the app.
11
Using the function button on
the doorbell
Learn a new push button – press and hold the
function button (4) for 3 seconds (the doorbell
will sound "beep-beep").
See the Troubleshooting section to sync
the push button (B) and doorbell (A).
Remove all known push buttons – press and
hold the function button (4) for 10 seconds (the
doorbell will sound "beep-beep-beep").
Enter Hubspace setup mode – press and hold
the function button (4) and volume UP button
(5) for 5 seconds (the doorbell will sound
"beep-beep-beep").
The doorbell can be muted manually or for a scheduled
period of time within the app. The speaker icon will
change depending on the selected mute function.
Mute - The doorbell will be muted until it is
cancelled.
Mute for 2 hours - The doorbell will be muted
for 2 hours.
Mute until sunrise - The doorbell will be muted
until the next morning.
Using the app – Select the doorbell in the app.
Follow the on-screen instructions to set the
start and end times for muting.
Using the app – Select the doorbell in the app.
Select the "Add Button" button.
Follow the on-screen instructions.
Select the trash can icon at the top of the
screen and follow the on-screen instructions
to remove the selected push button.
NOTE: The Hubspace setup mode is only needed if the QR
code is not available for scanning.
Follow the instructions in the Hubspace
app.
8
5
4
A
Publicidad
