TRAPP TRF 50 Manual De Instrucciones página 59

www.trapp.com.br
Correct Positioning of Strainers
To avoid accidents with the shredder and to keep
it in optimum operation conditions, it is imperative
that strainers are positioned correctly. They shall
be placed behind the guide pins, as in figure 1.
To correctly place the strainer, start by the curved
side, as in figure 2 and finish as in figures 3 and 4.
Fig. 1
Fig. 2
In case strainers are not properly placed, they may
be touched by the cutting blades and cause serious
damages to the shredder.
Observação:
TRF 50: 3, 5 and 12
TRF 60: 2, 3, 5 and 12
Fig. 3
11 11
11
peneiras que acompanham o
Fig. 4
59