LevelOne WNC-0600 Guía De Instalación Rápida página 5

8. Hardware installation steps
Find an empty PCI expansion slot from your
desktop computer.
Press the PCI Card firmly into the slot and
screw on the bracket.
Connect the supplied antenna cable to the
connectors on the PCI Card.
Power on your desktop computer.
9. The Windows "New Hardware" wizard will then
prompt.
Select Install the software automatically
enables PCI Card to complete the installation
of the Windows driver.
If using Windows XP, you may see a warning
screen like the example below. If you do see
this screen, just click "Continue Anyway"