ClimaCity HYAB-4 Manual De Instrucciones página 35

Emisor térmico de fluido
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2-1-2. Temperature setting:
Press
or
to set the target temperature directly and at
this moment the temperature starts to twinkle. Press
or
to set the target temperature. Temperature adjustable range is
from 10
~ 35
.
(Note: If press
or
without releasing, you can achieve
rapid increasing or decreasing;
If there is no pressing, the twinkle would stop after 5 seconds and
setting will be finished automatically.)
2-1-3.Timer setting(timer mode):
Long-press
(3 seconds) till the
showed. Same time the
clock will turn to 00:00 and start to twinkle. This means the timer
setting starts (as following):
Press
or
to set the timer length by every press with half
an hour (30 minutes). The maximum timer length is 24 hours.
When the timer is over, the unit would enter into standby mode
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hyab-5Hyab-7Hyab-9Hyab-11

Tabla de contenido