Descargar Imprimir esta página

Svan SC2700ENFIX Manual De Funcionamiento Para El Usuario página 50

Publicidad

Idiomas disponibles

Idiomas disponibles

Water Dispenser(only for appliance with
dispenser)
The water dispenser, located in the fridge
door, is for storing drinking water. With this
appliance you can obtain chilled water
easily without opening the refrigerator. You
should review of following tips.
water storage box cover
water storage box
Before using
Before using this appliance for the first time,
you should use it based on following
instructions:
1. Hold the two sides of the water tank
tightly, then pull up the water tank by
shaking up and down.
2. Unscrew the head, then clean it and the
inside of water tank.
head
Assembling
Before assembling, please drain the
inside
the tank, and check
washer reversed or not.
1. Insert the head into the hole.
2. Fit the tank along the guides on the door.
3.Press down two side of the tank.
4. When you hear a click sound, that
means the installation is completed.
Guide
21
dispenser Pad
head
water
whether the
Slot
Warning!
1. Be careful not to press on the head;
2. when fitting the water tank, ensure the
head inserted into the hole first.
Filling water
1.Open the cover by rotating it upwards.
2.Fill the water.
cover
Caution!
Do not Fill the water above the level
suggested. Otherwise, it may overflow even
when the cover is close.
Receiving water
You should use the correct cups to receive
water underneath the water dispenser.
dispenser pad
suggested position
Warning!
Don't push the dispenser lever forward
without cup, it may cause the water leak
from the dispenser.
Door
handles(only for appliance with
handle)
For the convenience of transportation, the
door handles are separately provided in a
plastic bag, you can install the handles as
follows.
1.Lever screw covers on the left side of the
door, and put them back to the plastic
bag.
2.Match the handle on the left side of the
door, keeping axes of screw holes in the
handle and the door in a line.
3.Fix the handle with the special screws
provided in the plastic bag, then install the
handle covers.
Middle rack

Publicidad

loading