Publicidad
Idiomas disponibles
Idiomas disponibles
5
Installing Your New Appliance
Before using the appliance for the first time,
you should be informed of the following tips.
Warning!
For proper installation, this refrigerator must
be placed on a level surface of hard material
that is the same height as the rest of the
flooring. This surface should be strong
enough to support a fully loaded refrigerator.
The rollers, which are not castors, should be
only used for forward or backward
movement. Moving the refrigerator sideways
may damage your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For this
reason, sufficient clear space should be
available around the refrigerator.
Suggestion: It is advisable for there to be
at least 50-70mm of clearance from the
back of the fridge to the wall, at least
100mm of clearance from its top, at least
100mm from its side to the wall and a clear
space in front to allow the doors to open
135°. As shown in following diagrams.
Note:
This appliance is considered "Garage
ready" only for "freezer" mode and performs
well with ambient temperature between 0℉
(-18℃)to 110℉(43.3℃）； If the unit set
into "fridge" mode, it performs well with
ambient temperature between 55
℉ (12.8℃) to 110℉（43.3℃）; the
appliance may not work properly if left at a
temperature above or below the indicated
range.
This appliance is designed for indoor use.
Publicidad
