IKEA PARASOLL Manual Del Usuario página 6

English
Get started
PARASOLL door/window sensor has a magnetic strip that detects when a door,
window or cabinet is opened.
You can connect it to smart lighting to illuminate a space when the sensor is open
or use DIRIGERA hub and IKEA Home smart app to receive notifications if the
sensor opens while you are away from home.
Get started without DIRIGERA hub
1. Open the back of the sensor, insert 1 x AAA battery and locate the
button.
2. Make sure the smart bulb you want to connect is set up and switched on.
3. Hold the sensor less than 5 cm away from the smart bulb you want to connect.
4. Press and hold the
LED light on the sensor will flash and the smart bulb will blink twice when pairing
is complete.
5. Use the assembly instructions to mount the sensor in the chosen location and
test it by opening and closing the magnetic strips.
Get started with DIRIGERA hub
Open the back of the sensor, insert 1 x AAA battery and close it again. Use the
assembly instructions to mount the sensor, then download the IKEA Home smart
app and follow the instructions on screen.
IKEA Home smart app
For Apple devices, download the app using the App Store. For Android devices,
download the app using Google Play store.
Get to know your product
The sensor can be connected to smart lighting to illuminate a space when the
magnetic strip on the sensor is open. This is perfect for lighting hard-to-reach
areas, such as basements or storage rooms.
Connecting more smart lights
1. Open the back of the sensor and locate the Pairing button.
2. Make sure the smart bulb you want to connect is set up and switched on.
3. Hold the sensor less than 5 cm away from the smart bulb and press and hold the
Pairing button for at least 10 seconds. A red light on the sensor will flash and the
bulb will pulse when pairing is complete.
Good to know
• You can connect a maximum of 10 smart lights to a single sensor.
• The sensor has a magnet at each end, so there is no right or wrong way round.
Make sure the sensor and magnetic strip are mounted within 5 mm of each
other.
• An LED light will blink twice when the sensor is opened, and blink once when the
space is closed again.
• The sensor can be mounted outdoors if the environment is sheltered from heavy
rain.
6
Pairing button on the sensor for at least 10 seconds. A red
Pairing