Daub DR Robot Manual De Usuario página 49

7.4. Placing the rounding plate in the machine
Figure Place the rounding plate
7
Place the rounding plate correctly on the rounding table. See Figure 7.
CAUTION
6
Inserting the rounding plate improperly can cause damage to the machine.
7.5. Starting the rounding process
Figure Start the rounding process
8
1. Press and hold the two start buttons simultaneously until the pressing ring is completely
against the rounding plate and the dough is pressed out properly. See figure 8.
2. Release the right start button. Continue to press the left start button.
The indicator light lights up.
DR Robot | User manual
2
1
1
49
www.daub.nl