Daub DR Robot Manual De Usuario página 55

8. MAINTENANCE
8.1. Safety instructions
WARNING
6
• Carefully read the safety instructions in section 3. before servicing the machine. This will
prevent possible personal injury or damage to the machine.
• Only qualified personnel may carry out other maintenance on the machine.
8.2. Maintenance schedule
8.2.1. Required tools
• Cold to lukewarm water
• Brush
• Damp cloth
• Plastic scraper
• Compressed air
• Grease
• Hydraulic oil
• Pipe spanner
8.2.2. Instructions
Frequency
Daily
Weekly
DR Robot | User manual
Instructions
Clean all used rounding plates (do not forget to clean the
bottom as well) with cold to lukewarm water.
Do not store the rounding plates in the machine, but hang
them on the side brackets of the machine.
Clean the top of the rounding table with a brush, damp
cloth, plastic scraper or compressed air.
Clean the working area of the dividing disc, knife and
pressing ring (see section 8.3.) with a brush, damp cloth,
plastic scraper or compressed air.
55
www.daub.nl