Publicidad
Idiomas disponibles
Idiomas disponibles
Use the device only on a flat and stable surface.
15.
EN
If ironing is interrupted, place the iron on the base. Make sure
16.
the base is placed on a flat and stable surface.
Do not immerse the device and cable in water or other liquids.
17.
Before connecting or disconnecting the device from the power
18.
source, set the steam control knob to the "0" position.
Never pull on the cord when unplugging from an outlet. To
19.
disconnect the device from the power source, grab the plug
and pull.
Do not allow the cable to come into contact with sharp edges
20.
and hot surfaces.
Always disconnect the device from the power source when
21.
filling or pouring water, and when it is not in use.
Do not use the iron with a damaged cord or plug, or if the
22.
device malfunctions, has been dropped or damaged in any
way, and if there are traces of leakage.
Do not attempt to repair or modify the iron yourself. This
23.
could cause a risk of electric shock or damage to the device.
In the event of problems, contact an authorized service center.
PRODUCT DESCRIPTION (FIG. A)
A. Steam control knob / Self-
cleaning
B. Steam ejection button
C. Spray button
D. Light indicator
E. Cable cover
DEVICE OPERATION
NOTE
Before using it for the first time, it is necessary to remove any protective
film that may have been stuck to the case or sole plate of the iron.
The first time the device is used, there may be a slight emission of smoke
and a specific odor. This is a normal phenomenon that does not adver-
sely affect the functionality of the device. This does not pose a risk to the
safety of use.
FILLING THE WATER TANK
1. Before filling the water tank, unplug the iron from the power supply and
NOTE! Hot surface - surfaces can get hot during use.
F.
Temperature control knob
G. Water tank
H. Ceramic-coated plate
I.
Sprinkler
J.
Water inlet cover
K. Wireless base button
Publicidad
