Hama 00205322 Instrucciones De Uso página 4

G Operating Instructions
Thank you for choosing this
Hama product!
Take your time and read the following instructions
and information completely.
Please keep these instructions in a safe place for
future reference.
1. Controls and displays
1. LC display
2. On/Off button
3. Bluetooth button
®
4. Mode button (TX|RX|BYPASS)
5. Button for new Bluetooth® connection
6. Multi-function button
(Pause / Play / Volume / Navigation)
7. Power supply (USB-C)
8. 3.5mm jack Audio OUT
9. Toslink (optical) Audio OUT
10. Toslink (optical) Audio IN
11. 3.5mm jack Audio IN
12. Antenna
2. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
3. Package contents
• 1x "Link.it duo" Bluetooth
/ receiver
• 1x USB-C power cable
• 1x 3.5mm to RCA audio cable
• 1x 3.5mm audio cable
• 1x optical audio cable (Toslink)
• 1x operating instructions
• 2x disposal slip (Triman/WEEE)
1
audio transmitter
®
4. Safety instructions
• The product is intended for private, non-
commercial use only.
• The product is intended only for use inside
buildings.
• Use the product only for the intended purpose.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Children should be supervised to ensure that they
do not play with the product.
• Do not use the product in areas in which electronic
products are not permitted.
• Route all cables so there is no risk of tripping.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to
any major shocks.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
Warning
• Do not attempt to service or repair the device
yourself. Leave any and all service work to
qualified experts
• Do not open the product or continue to operate
it if it becomes damaged
5. Switching on/off
• Connect the power supply (7) to a suitable USB-A
socket (e.g. TV/USB power supply unit etc.) using
the USB-C power cable. When the power supply is
established, the device starts automatically.
• Press the On/Off button (2) for approx. 3 seconds
until the display comes on.
• To switch off, press the On/Off button (2) for
approx. 3 seconds until the display goes off.
6. Receiver mode (RX)
Receiver mode lets you wirelessly stream music from
your smartphone or other Bluetooth® audio source
to your wired speakers or home cinema system.
6.1 Connection
Connect your speakers or home cinema system
to one of the two audio OUT connectors using an
appropriate cable.