8. Bypass mode (BYPASS)
Bypass mode allows you to transmit music from an
audio source (e.g. TV, home cinema system or
smartphone) to audio devices (e.g. speakers or
headphones) with cable and/or fibre.
8.1 Connection
• Connect your audio source to one of the two audio
IN connectors using an appropriate cable.
• Connect your audio devices to one of the two
audio OUT connectors using an appropriate cable.
• Press the mode button (4) until BYPASS appears in
the display to switch to bypass mode.
8.2 Playback
• Start playback on your audio signal source.
• You can select the volume and tracks using the
multi-function knob.
9. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation, mounting and improper use of
the product or from failure to observe the operating
instructions and/or
the safety instructions.
10.Technical data
Nominal voltage
Rated current consumption
Ambient temperature
Bluetooth version
Profiles
Codec
Bluetooth power class
Bluetooth frequency
Maximum radio-frequency
power transmitted
3
5V USB-C
180mA
0 to 55°C
CSR V5.2
A2DP
SBC/AAC/aptX LL
Class 2
2402-2480 MHz
25mW
11. Declaration of conformity
Hama GmbH & Co KG hereby
declares that the radio equipment
type [00205322] is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
Internet address:
https://uk.hama.com
Downloads
00205322