Descargar Imprimir esta página

RCA ANT1650F Guia Del Usuario página 2

Antena multidireccional plana amplificada para interiores

Publicidad

Idiomas disponibles

Idiomas disponibles

• Features a removable amplifi er to optimize reception of local standard defi nition and
high defi nition signals
• Outperforms traditional antennas due to patented design
• Eliminates constant adjustments with multi-directional reception pattern
• Gets great reception in any position—lying fl at, hanging, or standing
• Takes up minimal space
• Features a modern, contemporary look
Antenna Hardware
Before attempting to use your antenna, please remove all parts from the box and read the
instructions carefully The antenna package includes the following items:.
1 Flat Multi-Directional Antenna with Built-In 6' Coaxial Cable
1 Amplifi er Insert with Built-In Coaxial Cable
Removable Foot Stand
Setting Up the Antenna
Find the best location for the antenna
Before you connect the antenna, determine the best spot in your home for optimum
reception. Visit www.antennaweb.org to see where your local broadcasts are coming from.
Then, try as much as possible to avoid obstructions between these transmitters and your
antenna.
Because of its amplifi cation and multi-directional capabilities, the antenna receives UHF,
VHF, and local high-defi nition broadcasts, providing quality reception from most locations.
Note: The antenna may work well sitting on your TV or other components. However,
because electronic components can sometimes interfere with the antenna's reception, you
might notice an effect on the antenna's performance. Likewise, placing the antenna on
a metal surface may interfere with reception. If the antenna isn't performing as well as
expected, try moving it away from the component or placing it on another surface. Then,
re-scan for channels on your TV or converter box.
Positioning the Antenna
After locating the optimal position for your antenna, choose from one of three options:
• Lay the antenna fl at The antenna has raised feet on its bottom to prevent scratching
of furniture. Make sure you place the antenna on a fl at, level surface.
Note: This is the position that usually gives optimal performance.
• Hang the antenna The back of the antenna antenna has two mounting holes that can
be used for hanging. Place both holes over screws inserted in your wall.
• Stand the antenna upright The antenna comes with a removable stand. Simply place
the antenna in the stand to prop the antenna in an upright position.
2

Publicidad

loading

Este manual también es adecuado para:

Ant1650r