PRIXTON BF250 Manual De Instrucciones página 22

BUTTONS
MODE
JOGGLE
WHEEL -UP
JOGGLE WHEEL
-DOWN
RESET
TOTAL RESET
RECOVERY
BODY FAT
1.RECOVERY ：
(1)When the user presses "RECOVERY" button, the RECOVERY function is active. At this
time only PULSE and TIME is working, other functions will not be displayed, and the Sensor
Input is not available. TIME starts to count down from "0 ： 60", Pulse signal will be blinking
according user's heart rate BPM. When Time counts down to "0", it will show F1~F6 (F1 is
the best, F6 is the worst).
(2)LCD display as follows: (RECOVERY start condition & end condition).
(3)If the count down action to 0:00 is not completed and there is no pulse signal, the count
down action has to be done and shown F6.
(4)If you press the RECOVERY button prior to count down to 0:00, it will be end and return
to the main menu.
To confirm all settings
Rotate right (or press it) to select training mode and adjust
function value up. Rapidly rotate to increase the value fast
Rotate left (or press it) to select training mode and adjust
function value down. Rapidly rotate to decrease the value
fast
To clear the set-up value. Press RESET key and hold for 2
seconds to reset all function figures
To power on the console again
To test heart rate recovery status
To start or stop body fat testing
22