Publicidad
Idiomas disponibles
Idiomas disponibles
2.1.
Electrical safety
a)
The plug must fit the socket. Do not modify the plug in any way. Using original plugs and matching sockets reduces the
risk of electric shock.
b)
Avoid touching earthed elements such as pipes, heaters, boilers and refrigerators. There is an increased risk of electric
shock if the earthed device is exposed to rain, comes into direct contact with a wet surface or is operating in a damp
environment. Water getting into the device increases the risk of damage to the device and of electric shock.
c)
Use the cable only for its designated use. Never use it to carry the device or to pull the plug out of a socket. Keep the
cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled cables increase the risk of electric
shock.
d)
If working with the device outdoors, make sure to use an extension cord suitable for outdoor use. Using an extension
cord suitable for outdoor use reduces the risk of electric shock.
e)
If using the device in a damp environment cannot be avoided, a residual current device (RCD) should be applied. The use
of an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows obvious signs of wear. A damaged power cord should be
replaced by a qualified electrician or the manufacturer's service centre.
g)
To avoid electric shock, do not immerse the cord, plug or device in water or other liquids. Do not use the device on wet
surfaces.
2.2.
Safety in the workplace
a)
Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to accidents. Try to think ahead,
observe what is going on and use common sense when working with the device.
b)
If there are any doubts as to the correct operation of the device, contact the manufacturer's support service.
c)
Only the manufacturer's service point may repair the device. Do not attempt any repairs independently!
d)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one intended for use on live electrical devices) to
put it out.
e)
Regularly inspect the condition of the safety labels. If the labels are illegible, they must be replaced.
f)
Please keep this manual available for future reference. If this device is passed on to a third party, the manual must be
passed on with it.
g)
Keep packaging elements and small assembly parts in a place not available to children.
h)
Keep the device away from children and animals.
Remember! When using the device, protect children and other bystanders.
2.3.
Personal safety
a)
Do not use the device when tired, ill or under the influence of alcohol, narcotics or medication which can significantly
impair the ability to operate the device.
b)
The device is not designed to be handled by persons (including children) with limited mental and sensory functions or
persons lacking relevant experience and/or knowledge unless they are supervised by a person responsible for their
safety or they have received instruction on how to operate the device.
c)
The device can be handled only by physically fit persons who are capable of handling it, properly trained, familiar with
this manual and trained within the scope of occupational health and safety.
d)
When working with the device, use common sense and stay alert. Temporary loss of concentration while using the
device may lead to serious injuries.
e)
The device is not a toy. Children must be supervised to ensure that they do not play with the device.
f)
Do not put your hands or other items inside the device while it is in use!
2.4.
Safe device use
a)
Disconnect the device from the power supply before commencement of adjustment, cleaning and maintenance. Such a
preventive measure reduces the risk of accidental activation.
b)
When not in use, store in a safe place, away from children and people not familiar with the device who have not read
the user manual.
c)
Keep the device in perfect technical condition.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out by qualified persons, only using original spare parts. This will ensure
safe use.
f)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not loosen any screws.
g)
Do not move, adjust or rotate the device in the course of work.
h)
Clean the device regularly to prevent stubborn grime from accumulating.
i)
The device is not a toy. Cleaning and maintenance may not be carried out by children without supervision by an adult
person.
j)
Do not run the device when empty.
k)
It is forbidden to interfere with the structure of the device in order to change its parameters or construction.
Publicidad
