Publicidad
Idiomas disponibles
Idiomas disponibles
3.1
Cleaning and
maintenance
3.2
Disposal
3.3
Specifications
Foot warmer
The electric foot warmer should be kept clean because it may not be washed
or dry-cleaned. Before cleaning the foot warmer, always disconnect the plug
from the mains and allow it to cool down. The foot warmer can be cleaned dry
with a soft brush. Small marks can be removed with a cloth or a slightly damp
sponge, using a mild liquid cleaner. The foot warmer may not become wet. If
it becomes damp it must be air-dried. Store the foot warmer in a dry place and
do not place any objects on top of it.
Insert cover (interior)
Before cleaning the foot warmer, the insert cover must be taken out. The cover
can be cleaned with a damp cloth or according to the care instructions on the
labels. Use solvent-free cleaners only. Only use the foot warmer again once it
and the cover are completely dry.
This product must not be disposed of together with domestic waste.
All users are obliged to hand in all electrical or electronic devices, regardless
of whether or not they contain toxic substances, at a municipal or commer-
cial collection point so that they can be disposed of in an environmentally
acceptable manner.
Consult your municipal authority or your dealer for information about disposal.
Name and model
:
Power supply
:
Heat output
:
Automatic switch off :
Switching levels
:
Dimensions
:
Weight
:
Mains lead length
:
Article No.
:
EAN Code
:
In accordance with our policy of continual product improvement,
we reserve the right to make technical and optical changes
without notice.
The current version of this instruction manual can be found under
www.medisana.com
3 Miscellaneous
MEDISANA foot warmer FWS
220-240 V AC 50 Hz
max. 100 W
after approx. 90 min
0 - 1 - 2 - 3
approx. 30 (l) x 30 (w) x 23 (h) cm
approx. 580 g
approx. 2 m
60257
40 15588 60257 3
GB
15
Publicidad
