Safety Instructions - Extel eWatch 900 Instrucciones De Uso E Instalación

1. SAFETY INSTRUCTIONS

Important!
• Please read the user manual carefully before installing or using this product.
• If you are installing this product for a third party, please remember to leave the manual or a copy thereof with
the end user.
Warning:
• System components may only be dismantled by authorised technicians.
Safety precautions:
• In order to use the system safely, it is essential that installers, users and technicians follow all safety procedures
described in this manual.
• Specific warnings and warning symbols are marked on the components where necessary.
Any damage caused by failure to adhere to the manual shall void the warranty. We shall not be held liable for any
resulting damage!
We shall not be held liable for any damage to property or persons caused by incorrect use or failure to comply
with safety instructions.
This product has been manufactured in full compliance with safety instructions. In order to maintain this status
and get the most out of the product, users must adhere to the safety instructions and warnings contained in this
manual.
The person using this system is responsible and must verify whether the CCTV system compiles with the laws
currently in force in the country of use.
- You should only use this product with a voltage ranging from: 100 to 240 Volts and 50 to 60 Hertz. Never at-
tempt to use this device with a different voltage.
- Ensure that all the system's electrical connections conform to the instructions for use.
- In commercial establishments, ensure that you adhere to the electrical installation accident prevention regula-
tions.
- In schools, training facilities, workshops, etc., qualified personnel must be on hand to oversee electronic equip-
ment operation.
- Adhere to the instructions for use of any other devices connected to the system. (e.g. VCR, TV, PC)
- Please contact an experienced person should you have any doubts about equipment operation or safety.
- Never plug in or unplug electrical equipment with wet hands.
- When installing this product, check that power supply cables are not at risk of being damaged.
- Never replace damaged electrical cables yourself! In this case, remove them and call an expert.
- The mains supply should be located close to the device and must be easily accessible.
NOTE
Gives users important usage and maintenance (repair) instructions in the documents which accompany the equip-
ment.
IMPORTANT
The user of this product is responsible and must verify that its use complies with the video surveillance laws in
force in the country in which the system is used.
In France: For more information, please contact the prefecture of your department.
Outside France: Please contact the authorities in charge of the use of video surveillance products (Directorate of
Civil Liberties, Bureau of general regulations, etc.).
CFI EXTEL EWATCH 900 07/2017
GB2