Safety Instructions; Contents Of The Kit; Installing The Camera - Extel O CONTROL JLT-8035 Instrucciones De Uso E Instalación

1. SAFETY INSTRUCTIONS

Important!
Please read the user manual thoroughly before installing or using this product.
• If you are installing this product for someone else, remember to leave the manual or a copy of it for the
end user.
Warning:
• The different elements are only to be dismantled by an authorised technician.
Safety instructions:
• To safely use this system it is essential the fi tters, users and technicians follow the safety procedures de-
scribed in this manual.
• Specifi c warnings and warning symbols are displayed on the components if necessary.

2. CONTENTS OF THE KIT

• 1 LCD colour monitor
• 1 monitor adapter (5V) + 1 camera adapter (5V) check the indications on the adapter before connecting it
• 1 motorised wireless camera 2.4GHz
• 1 RCA-jack cable for A/V output

3. INSTALLING THE CAMERA

a.Camera description (fi g.2)
1. Lens
2. IR LED
3. Dusk down
4. Microphone
5. Speaker
6. Aerial
7. Thermometer
8. On/Off button / Pairing button (press down for 2 secs. to turn on or off)
9. LED 'power' indicator (green: camera ON 'battery use' / orange: camera ON 'charging' / red: camera OFF
'charging')
10. 5V Socket
The user of these products is responsible for the use of the video surveillance system and must verify that such use
complies with the video surveillance laws in force in the country in which the system is used.
In France: For information, contact the prefecture of your department.
Outside France: For information, contact the authorities in charge of the use of video surveillance products (Directorate
of Civil Liberties, bureau of general regulations, etc.)
IMPORTANT
The cameras are subject to interference from wireless phones, micro-wave ovens and other wireless devices operating
on 2.4 GHz (WIFI for example).
Keep the system more than 3 m from these devices during installation and use.
Choose a suitable location to install the camera. As far as possible, your system must be installed in a dust-
free zone, with few vibrations, good air circulation and fi tted with a wall power outlet for the 5V adapter.
When installing the camera, check that the image reception on the monitor is correct before fi nalising. For
example, ask someone to hold the camera in the area to be monitored.
CFI EXTEL O'CONTROL - 10/2015 - V1
GB2