Num'axes VIS1012 Instrucciones De Uso página 27

Note: to cancel and exit the current setting, press « + » button.
 Set up backlight setting:
- Once in the setup interface, press "IR" button to move to the next menu: "Backlight setting".
- Press « - » button (B) to enter in backlight setting interface. The LCD backlight level can be toggled from level 00 to level 03.
- Press « + » and « - » button to adjust backlight setting. This allows you to quickly make a significant change in viewing brightness and also provides a greater total range of
adjustment.
- After finish the setting, press image brightness button
 Choice of storage mode (for videos and photos):
- Once in the setup interface, press "IR" button to move to the next menu: "USB".
- Press « - » (B) and enter into submenu.
- Press "IR" button (C) and choose your storage mode: MSDC or PCCAM.
- Then press record button « REC » (F) to confirm and return to the main interface.
to confirm.
27/65