Viewing And Deleting Photos Or Videos - Num'axes VIS1012 Instrucciones De Uso


Icon overlay ON/OFF
The user has the option to control how the icons are displayed on the LCD screen. Normally, when any button is first pressed, all icons are displayed for 5 seconds, but no change to
the unit's setting is made (the "REC" and "IR" buttons are exceptions. Image capture begins immediately the first time "REC" button is pressed. And the infrared light turns on at the
first press of "IR" button).
If the same button is pressed again, the button performs its function, and the display icons remain visible for 10 seconds after the last press, before turning off automatically.
To display all icons constantly, press and hold the "IR" button for 3 seconds. Repeat to switch back to auto icon overlay (only visible for 10 seconds max following the use of a button).
 Selecting PAL or NSTC video output
The video output jack (G) is set to PAL format (25 fps) format used in most countries by default. To select NSTC video output (30 fps TV standard in the USA, Canada, Mexico, etc.),
connect the unit to your video device first. Press and hold both the « IR » (C) and the image brightness button
eyepiece. When the display changes to « NSTC », release the buttons. To switch back to PAL video output format, hold both buttons for 5 seconds until the display indicates « PAL »,
then release the buttons.
Note: the « Auto Off » feature is disabled when using video output jack.

Viewing and deleting photos or videos

You can view and delete photos or videos on your computer.
 Viewing files on your computer via USB connection
Your night vision unit is a plug and play USB storage device for users of Windows or MAC.

Plug the larger end of the supplied USB cable into an available USB port on your computer.

Open the cover of the unit and then plug the smaller end of the USB cable into the night vision unit USB port on the bottom.

The night vision unit will automatically turn ON and display the word « MSDC» and USB icon on the status display.

At the same time, your computer will recognize the device as a Removable Storage device. You will find it under MY COMPUTER.

At this point you have several options:
 To view your images or play your videos: Click on the Removable Storage device and then drill down to the file you want to see and double click on the file name.
 To save your images and videos: Highlight the file or files you want to save and drag them to your hard drive.
 To delete your images and videos: Highlight the file or files you want to delete and press the [DELETE] button.
 To erase all files and reformat your SD memory card: Right click on the Removable Storage device under My Computer and select FORMAT then click START. You will receive a
Warning message press [OK]. Then CLOSE to exit.
buttons down for 5 seconds while viewing the display through the
30/65