Unit Description; Unit Installation - Hayward AQUARITE FLO Manual Del Usuario

2019
From 3 g salt / l
Sanitization system and controller for swimming pools.
Sanitization: Chlorine is produced by electrolysis of salt water, using salt water of low salinity. Production of sodium
hypochlorite (liquid chlorine) in the electrolysis cell is achieved with a minimum of 3g salt per litre. The chlorine combats
and eliminates bacteria, viruses and pathogenic agents, and oxidizes organic matter present in the water. The used
sodium hypochlorite reconverts into salt after a few hours.
Page 3 of 5
OWNER'S MANUAL

1. UNIT DESCRIPTION

254 mm
Supply 230 V - 50 Hz
A
Cell connection
B
Options connections
C
ON/OFF switch
D
ELECTRONIC BOX

2. UNIT INSTALLATION

Filtration pump timer
A
Silex / glass / diatom filter
B
Recirculation pump
C
Electronic box
1
Electrolysis cell (always vertical)
2
USE ONLY GENUINE REPLACEMENT PARTS
AquaRite Flo
Self-cleaning
298 mm
Øext
63 mm
133 mm
A
B
C
D
Sea water
Øint
63 mm
310 mm
Electrolysis cell
Connection to unit
Cell housing
Flow/gas detector (internal)
CELL
Electricity consumption
Use of a 25 A time delay circuit breaker is recommended
with this equipment. Where the power supply is shared
with other devices, please consult a technician for correct
sizing of your installation.
Maximum
Product
consumption
8 Gr/h 80 W
16 Gr/h 130 W
22 Gr/h 145 W
33 Gr/h 165 W
50 Gr/h 210 W
EN
g Cl 2 /h
8
16
22
33
50
Rev. A