AVE Domus Serie Instrucciones De Uso página 43

The change from one zone to the next occurs on a time-out basis, after 5 seconds, and so push and hold
the button down for the time required, which must be longer than 20 seconds and up to a maximum time of
10 minutes.
HOLD THE BUTTON DOWN FOR THE TIME REQUIRED, TO
PROGRAMME THE TIME (MIN 20 SEC. MAX 10 MIN)
PUSHBUTTON PROGRAMMING
MODE COMPLETED
Still from the example in paragraph 1.1.3, the bottom zone of the second column is presented - that for
monostable mode. In this case too, the time is associated to the zone by keeping the finger in contact with
the zone for the time T, which can be programmed again as you like by repeating the operation, between a
min and max that are managed in exactly the same way as for roller shutter mode.
ENGLISH
42