Corby Westminster Manual De Uso Y Cuidados página 11

SETUP
Westminster / SFE0003 / 5323
Mayfair / SFE0006 / CT-1340UZH
Factory setting codes
Guest code (4-6 digits): 1234
Manager code(6 digits): 123456 (requires CEU)
First opening
• Install 4x AA batteries into the external power supply.
• Plug the external power supply into USB In port on the safe door.
• Input the factory setting guest code.
• The door will automatically open.
• Remove the batteries from the external power supply and place into the safe
door battery pack.
Changing manager code
Refer to CEU section at the end of this manual.
USE
To Close:
(1) Input your personal 4-6 digit code.
(2) Close the door, then press "lock".
To Open:
(1) Input your own 4-6 digit code.
(2) The door will automatically open.
Emergency Open:
(1) Wait 15 minutes from the time the code has been incorrectly inputted 3
times. (This is a safety feature).
Key Hole
1 1