Corby Westminster Manual De Uso Y Cuidados página 12

(2) Carefully remove the "user's instructions" section on the safe front to reveal a key
hole.
(3) Using the keys supplied open the safe.
(4) With the key still in the safe, type "1234lock".
(5) Close the door and remove the key.
The safe is now reset to the original factory password of 1234.
IMPORTANT:
ERROR CODES - Westminster / SFE0003 / 5323
"o-ON": Enable the password hidden function
"o-OFF": Disable the password hidden function
"LO-BAT": Low Battery
"CLOSE": Closing
"CLOSED": Closed
"OPEN": Opening
"OPENED": Opened
"NEW": Need to input new password
"AGAIN": Need to input the same password again
"DONE": Done
"HOLD(1-15)": The door is locked (1-15 minutes) wrong password inputted multiple times
S
"E-CODE": Error password
"E-RUN" —— Can not open normally. The lock is stuck.
E
SOLUTION: Push the door to allow more space for the lock move.
"B-LOC" —— Can not close normally. The lock is stuck.
C
SOLUTION: Push the door to allow more space for the lock move.
T
ERROR CODES - Whitehall / SFE0004 / 2042A-1
I
"BA-HI": Battery is OK
O
"BA-LO": Low battery
"CLOLSE-": The lock is closing
N
"CLOSED": The lock is closed
"OPEN": The lock is opening
0
"OPENED": The lock is opened
"NEW": Need to input a new password
3
"AGAIN": Need to input the same password again
"DONE": Done
"ERROR" -- Password is not correct
"ERROR1" -- Can not open normally. The lock is stuck.
SOLUTION: Push the door to allow more space for the lock to move.
"ERROR2" -- Can not close normally. The lock is stuck.
SOLUTION: Push the door to allow more space for the lock to move.
1 2
Always keep the safe keys in a secure location.
Mayfair / SFE0006 / CT1340UZH