9. IN THE EVENT OF A BREAKDOWN
Despite the care we take during production, a breakdown can never be totally ruled out. Before contacting your
retailer's after-sales department, please check that:
• The appliance is properly plugged in
• There is not a power cut in progress
• The breakdown is not one of those described in the table at the end of this manual
IMPORTANT: if the power cable supplied is damaged, it must be replaced by the manufacturer, a service
centre approved by the brand or the retailer. In all events, it must be replaced by qualified personnel in
order to avoid any risk of injury.
I
F THESE CHECKS REVEAL NOTHING
Unplug the appliance before carrying out any maintenance or
10. SPARE PART AND SAV
Aesthetic and functional spare parts according to REGULATION (EU) 2019/2019 (Annex II, point 3.), are
made available to professional repairers and end users for a period of 7 years or 10 years (List in Annex
II, point 3.a.1 and 3.a.2) from the placing on the market of the last unit of the model. The list of spare
parts and the procedure for ordering them (professional access / private access) are available on the
following website: www.interfroidservices.fr or by post at the following address FRIO - Interfroid Services,
143 Bd Pierre Lefaucheux - 72230 ARNAGE
For other functional spare parts not specified in the EU regulation 2019/2019, they are available for a
period of 10 years.
All FRIO wine cellars have a 1-year functional parts warranty.
The EU regulation 2019/2019 and its annexes are available on the European website eur-lex.europa.eu
11. TROUBLE SHOOTING
You can solve many common wine cooler problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
Wine cooler does not operate
Wine cooler is not cold enough
Turns on and off frequently
,
THEN CONTACT YOUR RETAILER
repair work.
PROBLEM
CAUTION!
•
Not plugged in
•
The appliance is turned off
•
The circuit breaker tripped or a blown fuse
•
Check the temperature control setting
•
External environment may require a higher
setting
•
The door is opened too often
•
The door is not closed completely
•
The door gasket does not seal properly
•
The room temperature is hotter than normal
'
A
-S
D
S
FTER
ALES
EPARTMENT
POSSIBLE CAUSE
.
51