Descargar Imprimir esta página

BS BATTERY U1-12 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Disposal:
- Take old batteries to a proper collection point.
- The instructions listed under part 1 must be followed during transportation.
- Never dispose old batteries in a domestic waste bin.
INFORMATION
(1) NB: interruptions to the power supply may cause electrical devices (e.g. immobiliser, radio etc.) to malfunction.
(2) Only install batteries that have been sufficiently charged, i.e. with a minimum terminal voltage of 12.5 V.
(3) Switch off the engine and all electrical devices before removing the battery.
(4) When removing the battery, disconnect the negative terminal (–) before the positive terminal (+).
(5) Clean the installation area in the vehicle before fitting the new battery.
(6) Clean the battery terminals and terminal connectors, treat the terminals with acid-free grease.
(7) Use the original attachment parts. Firmly secure the battery.
(8) Wait until you're connecting the battery within the vehicle before removing the protective caps. Attach these to the terminals
of the battery being replaced to prevent short circuits and sparks.
(9) When installing the new battery, connect the positive terminal (+) before the negative terminal (–). Ensure the terminal connectors are securely in place.
(10) Take parts such as terminal covers, the elbow, the hose connector and the terminal clamp holder from the previous battery
and connect as before. Use any available or supplied filler caps.
(11) Leave at least one gas outlet open to avoid the risk of explosion. This also applies to the transport of used batteries.
4
www.bs-battery.com |

Publicidad

loading