Publicidad
•
The AC power source for the UPM should be conveniently near the
UPM and easily accessible – avoid extension cords or temporary
power strips to power the UPM.
•
The total leakage current of the UPM and consumer connected
equipment should not exceed 3.5 mA for non-medical units.
•
Not for use in a computer room as defined in the Standard for the
Protection of Electronic Computer/Data Processing Equipment,
ANSI/NFPA 75.
•
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
•
The battery should be disconnected from the UPM by unplugging
at its quick connectors when maintenance or service work inside
the UPM is necessary and when not consistently connected to the
AC mains power.
•
Do not dispose of batteries in a fire – batteries may explode.
•
Do not open or mutilate batteries. Doing so may release electrolyte
or other toxic substances, which may be harmful to the skin, eyes,
or the environment.
A battery can present a risk of electric shock and high short circuit
current. The following precautions should be observed when working
with batteries:
•
Remove watches, rings, or any other metal jewelry or objects
which may make contact with the battery.
•
Use tools with insulated handles.
FCC Issues
This UPM has been tested and found to comply with the limits for a
Class A digital devices (Class B compliance optional), pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in both residential and
commercial environments.
8
Attention
A01-00055 Rev P
Publicidad
