TOPDON JS1500 Manual Del Usuario página 8

1. Power Button
Press the power button to turn the tool ON.
Press and hold the power button to turn on the LED
light, then press the button again to toggle the light
among the following modes: Flashlight, SOS, Strobe,
and OFF.
2. Battery Level Indicators
Indicate the charge level of the internal battery of the
jump starter. (The four indicators will flash for around 10
seconds when an over-temperature is detected.)
Note: Only jump start vehicles when the battery level
of the jump starter is above 50%.
3. Jump Start Socket
4. USB Type-A Output (QC18W 12V 1.5A, 9V 2A, 5V
3A)
5. USB Type-A Output (5V 2.4A)
6. LED Light
7. USB Type-C Input (5V 3A)
8