Publicidad
Idiomas disponibles
Idiomas disponibles
Important safety instructions
PLEASE READ THIS ENTIRE DOCUMENT PRIOR TO
SETTING UP, OPERATING, AND SERVICING YOUR
CRICUT
®
SMART CUTTING MACHINE. PLEASE
FOLLOW THE ENCLOSED INSTRUCTIONS, ONLINE
INSTRUCTIONS, AND OTHER OFFICIAL CRICUT
INSTRUCTIONAL MATERIALS.
In these instructions the term "Machine" means
Cricut Joy Xtra™.
WARNING: Risk of Injury, Fire, and
Electric Shock.
Operating Machine in a manner not
prescribed in the enclosed instructions,
online instructions, and other official Cricut
materials may result in damage to the Machine,
property damage, injury, or even death.
Machine is intended to be operated by an
adult only. Not intended for use by children
12 years or under. Always supervise
children around Machine.
Use Machine only for its intended crafting purpose.
INDOOR USE ONLY. MACHINE IS INTENDED
FOR INDOOR USE IN DRY LOCATIONS ONLY.
DO NOT USE IN OR NEAR WATER. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
Machine is not intended for use by persons with
reduced physical, sensory or cognitive capabilities,
or lack of experience and knowledge, unless they are
supervised by a person responsible for their safety
and familiar with the safe operation of Machine.
Disconnect the electrical power by unplugging
Machine before servicing or cleaning.
Only clean Machine with a soft cloth dampened
with glass cleaner or water. Never use any kind
of flammable liquid to clean Machine. Do not use
6
solvents such as acetone or nail polish remover to
clean Machine as these will permanently damage
Machine's surfaces.
Always unplug Machine before replacing the blade.
Blades are extremely sharp and should be handled
with caution and extreme care. Prevent blade
contact with hands and body to avoid injury. Do not
allow children to handle blades. Blades and other
small parts are choking hazards and should be kept
and stored away from children.
Do not open, modify, or otherwise tamper with Machine.
Do not operate if Machine or cord is damaged.
Contact Cricut Member Care for service: cricut.com/
contact or 1-877-727-4288.
Use only Cricut approved power adapters. Never
pull on the cord to disconnect Machine from the
electrical outlet; instead, grasp the plug and pull to
disconnect Machine.
The power cord should be positioned so that it
will not drape over the countertop or tabletop
where it can be tripped over, snagged, or pulled on
unintentionally (especially by children).
Place Machine on a strong, flat, level, and stable
surface. Make sure your work space has enough
space in the front and back of Machine to allow the
machine mat to move through Machine freely.
Do not place your fingers or other objects in
Machine while connected to electrical power, or
while Machine is powered on, or during operations.
Keep hair, jewelry, loose clothing, fingers, other
body parts, and any other items that could get
caught in the moving parts away from Machine
while it is operating as the rapid movements of the
carriage, mat, and material during operation may
cause injury.
Do not touch the mat or material during machine
operation even if the mat or material stops moving.
Do not touch the mat or material until Machine
ejects the mat or material from Machine.
Machine should never be left or stored outside,
in unheated or unairconditioned spaces, or in
environments where Machine can come in
contact with water.
Technical specifications
Cricut Joy Xtra™ Models: JCTR201C
Description: The Cricut Joy Xtra is a desktop
cutting and writing device for helping Do It Yourself
(DIY) crafters make crafting projects. It takes
images created in a software design environment
(Cricut Design Space) and recreates the images
in paper, vinyl, etc. using tools to cut and write on
these materials.
Product specifications
Size (Width x Length x Height)
12.48 in x 4.46 in x 5.87 in (31.71 cm x 11.32 cm x 14.91 cm)
Weight
6.03 lbs (2.74 kg)
Power input (appliance inlet)
18 Vdc, 2.5 A
External power supply
Input: 100-240 Vac, 50/60 Hz, 1.5 A; Output: 18 Vdc, 2.5 A.
Model: TS-A045-1800251
Operating mode
Continuous
Electrical classification
Class III (Supplied by SELV)
Pollution degree
PD 2
Ingress protection
IPX0 (ordinary)
Wireless specifications
Transmission type
Bluetooth
Frequency Band
2.4000 -2.4835 GHz
Maximum Radiated Power
<= 100 mW (e.i.r.p.)
Caution: Moving the star wheels while the machine
is in material loading mode can result in pinched
fingers. To avoid pinching, move star wheels all the
way to the right prior to choosing material type for
projects that use Foil Transfer Tool and/or Card Mat.
The mechanical design is like that of a small desktop
printer or plotter with an electrically driven head
that moves the cutting/drawing tools laterally,
and feed rollers that move the crafting materials
longitudinally. The combination of these movements
gives 2 axis motion to perform the desired actions
(cutting, drawing, etc.) on the crafting materials in a
2-dimensional plane.
7
Publicidad
