Publicidad
Idiomas disponibles
Idiomas disponibles
11-SET-UP AND ADJUSTMENTS
11.8 UPPER HEAD PRESSURE
Adjust the pressure of the upper taping unit on the box.
Decrease or increase the air pressure according to the
box weight.
11.9 ADJUSTMENT OF THE UPPER HEAD DESCENT
SPEED
In normal working conditions the upper had comes down
up to the minimum height of 110 mm at the end of each
sealing cycle.
It is possible to set a limit for the descent when:
a) boxes of different size have to be sealed
and the minimum height is known.
b) a batch of boxes of uniform size has to
be sealed and the production speed-up is required.
To adjust the minimum height of the upper head do as
follows:
Turn the selector clockwise to raise the upper head as-
sembly.
Insert the box to be sealed and rotate anticlockwise the
selector to allow the upper head to come down on the
box.
Bring the height stop against the upper assembly and lock it with the
proper handle.
Turn clockwise the EMERGENCY STOP and press the ON button.
The box will be dragged by the top and bottom belts, sealed and then
driven out of the machine.
January 2007
87
ENGLISH
Publicidad
