Descargar Imprimir esta página

M.J. MALLIS GROUP Siat SR46-S Manual De Instrucciones Y Recambios página 90

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

12-OPERATION
12.1 OPERATOR'S CORRECT WORKING POSITION
12.2 STARTING THE MACHINE
Push the main switch ON.
12.3 STARTING PRODUCION
After having adjusted the machine according to the box dimensions (height-width), let the machine idle for a
while and check its safety devices (see section 12.8). Then start the working cycle.
12.4 TAPE REPLACEMENT
Be careful with the blades !
Skill 1 operator
When needed, replace the tape roll, as follows:
-Press the LOCKABLE EMERGENCY STOP BUTTON;
-Repeat all the operations shown in sections 11.1 and/or 11.2
12.5 CLEANING
Before carrying out any cleaning or maintenance operation stop the
machine by pressing the OFF button on the main switch.
Disconnect the electric power.
Activate the pneumatic circuit rotating counter-clockwise the knob 1
and lift the upper head assembly by rotating clokwise the selector 2.
Lock the upper head with the height stop (see section 11.2).
CLEANING - Skill 1 operator
Use dry clothes or light detergents.
Do not use solvents or water jets.
ENGLISH
90
1
2
January 2007

Publicidad

loading