XFARM xSense Mini Guía Rápida De Instalación página 6

Assembly and installation guide: assembly steps
1
2
3
6
Place the xSense Mini on a flat surface
and rest the anemometer blades on
its seat and, using the allen wrench
provided, secure it to the axis,
ensuring that it turns freely without
friction.
Place the wind vane on its axle,
ensuring that the axle reaches the
end of its stroke, then secure it with
the allen wrench provided. Always
check that it turns freely without
friction.
Rain gauge seat
Place the rain gauge in the
appropriate seat and tighten the
screw to secure it
Screw