XFARM xSense Mini Guía Rápida De Instalación página 8

Assembly and installation guide: required tools
At this point we are ready to go into the field and install the xSense Mini.
To do this, we need:
- Metal pole of approximately 3 metres with a diameter
of 30 - 44 mm (40 mm recommended)
- Auger 10-15 cm in diameter and at least 50
cm long
- Rubber gavel
- Spanner 11
- Compass, to orient the xSense sensor
assembly correctly (e.g. mobile phone app)
- Spirit level (mobile app can be used)
8