Publicidad
Idiomas disponibles
Idiomas disponibles
When the ERM is connected to the system, the ERM's "Connected" LED will be
solid green and the thermostat will show "ERM" in its Wireless Manager. (Fig.
10)
Compressor
Boiler
Connected
Mounting ERM
9. Use two screws and wall anchors to attach the ERM to the exte-
rior wall near the compressor. The location should be at least
3 feet above ground and oriented with the two wire exits fac-
ing downward. See Figs. 11 and 12.
10. Attach cover and secure with bottom screw (Fig. 13).
Equipment Remote Module I ERM5000R
Compressor
CONNECTED LED STATUS
Flashing: Device Connecting
Boiler
Connect
Green: Device Connected
Red: Not Communicating
Connected
Y2
O/B
J R C Y1
D L S1 S1
Compressor:
T
T
Jump J and R
Boiler:
Remove Jumper
CORRECT
33-00135EFS—11
CONNECTED LED STATUS
Flashing: Device Connecting
Connect
Green: Device Connected
Red: Not Communicating
MOUNTING
SCREWS
Fig. 11. Mounting orientation.
Compressor
OR
MCR35661
Fig. 10.
INCORRECT
Flashing: Device Connecting
Boiler
Connect
Green: Device Connected
Red: Not Communicating
Connected
INCORRECT
CONNECTED LED STATUS
MCR35662
MCR35665
10
Publicidad
