Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up your new microwave oven
Function
The my pattern function
can be turned on and off.
9
My Pattern
It will let you see the most
used cooking mode first
on the display.
The demo mode can be
10
Demo mode
turned on and off.
You can reset the settings
11
Reset
of you microwave oven.
NOTE
•
If you change your mind while adjusting a setting, touch the
back, and then adjust the setting again.
•
If there is a power interruption, you will need to reset these options.
•
If the clock is set for standard time, the Daylight Savings Time Adjustment
function allows you to change the time easily without needing to reset the
clock. Daylight Saving Time begins for most of the United States at 2 a.m. on
the first Sunday of April and reverts to Standard time at 2 a.m. on the last
Sunday of October.
•
If the Filter Remind function is ON, the microwave will remind you to clean or
replace the baffle filter every four months. When it is time to clean or replace
the baffle filter, the microwave displays the "Filter" message to remind you to
clean or replace the baffle filter. To remove the message, touch the number
0 when the microwave is in standby mode. If you don`t want to receive this
message, set the Filter Remind function off in Options.
14 English
DMO30U970SS_DA_DE68-04568E-00_EN.indd 14
DMO30U970SS_DA_DE68-04568E-00_EN.indd 14
Description
Options
On
Off
On
Off
Reset
button to go
Smart Control
To use the microwave oven's Smart Control, you must download the SmartThings
app to a mobile device. Functions operated by the SmartThings app may not work
smoothly if communication conditions are poor or the microwave oven is installed
in a place with a weak Wi-Fi signal.
How to connect the microwave oven
1.
Download and open the SmartThings app on your smart device.
2.
Follow the app's on-screen instructions to connect your microwave oven.
3.
To operate smart control function from the microwave oven, touch and hold
OK button for 3 seconds.
4.
Once the process is complete, microwave oven and SmartThings app will
confirm you are connected.
If the microwave oven is not connected, follow the instruction on the app to
5.
reconnect.
Microwave Oven remote control using the SmartThings app
Microwave Oven Monitoring
Check the status of the microwave oven
Microwave Oven Remote Control
Remotely control vent fan speed/cooktop
lamp
NOTE
For safety reasons, you cannot turn on the microwave oven remotely and you
must specify the cooking time to enable remote control.
Smart Control will not work properly if the Wi-Fi Connection is unstable.
4/13/2023 1:29:39 PM
4/13/2023 1:29:39 PM
Publicidad
