Publicidad
Idiomas disponibles
Idiomas disponibles
TEMPERATURE CONTROL SETTING
• Always check the garment label for ironing instructions before ironing the garment. If the
ironing instructions are missing, the table below may help you.
• If the fabric consists of various kinds of fibers (e.g., cotton with polyester) you should al-
ways select the ironing temperature for the material with the lowest advised temperature.
IRONING
LABEL
SETTING THE TEMPERATURE
• Insert the Plug in the wall socket and stand the iron upright.
• Turn the Temperature Control Dial (1) to the desired temperature setting.
• The desired temperature has been reached when the pilot light has turned off. The pilot
light will turn on and off from time to time, indicating that the selected temperature is being
maintained.
SPRAYING
This function can be used at any time and does not affect the ironing temperature.
• Fill the iron with water as described on page 3.
• Aim the Spray Nozzle (4) towards the garment.
• Press the Spray Button (3).
STEAM IRONING
This function can be used onlu at higher ironing temperatures.
●●
For moderate steam
●●● or MAX
For maximum steam
• Fill water into the iron as described on page 3.
• Stand the iron upright.
• Insert the plug into the wall socket
• Turn the Temperature Control Dial (1) to the "●●", "●●●" or MAX setting
• The pilot light turns off when the required temperature is reached, indicating the iron is
ready for use.
• Turn the Steam Control Knob (7) to the required position. Steam will emit from the holes in
the Sole Plate.
KIND OF TEXTILE
Synthetic
Synthetic
Synthetic
Silk
Wool
Cotton
Linen
FABRICS
Acrylic
Polypropylene
Polyurethane
Acetate
Triacetate
Polyamide (Nylon)
Polyester
Viscose (Rayon)
Silk
Wool
Cotton
Linen
4
Publicidad
