Program Playback - Teac CD-P1260MKII Manual Del Usuario

Up to 32 tracks/files can be programmed in the desired order.
1
Press the PROGRAM button when playback is stopped.
CD
MP3/WMA disc
The MEMORY indicator appears, showing that program mode is
enabled.
< To stop programming, press the Stop button (H).
2
(When programming with an MP3/WMA disc)
Press the Number buttons to select a folder, then press
the PROGRAM button.
< You can also use the Skip buttons (.//) to select folders.
< MP3/WMA files not located in a specific folder are in the "01"
(ROOT) folder.
< You can also press the ENTER button to confirm a folder.

Program playback

3
Press the Number buttons to select a track/file, then
press the PROGRAM button.
The track/file is programmed, and "P-02" is displayed.
< You can also use the Skip buttons (.//) to select tracks/
files.
< You can also press the ENTER button to confirm a song number.
< Repeat steps
< You can program up to 32 tracks/files.
< To stop programming, press the Stop button (H). Programming
is cancelled, but the program contents are retained in memory.
To restart program playback, press the PROGRAM button, and
then press the Play/Pause button (G/J).
4
When the selection of track/file numbers is completed,
press the Play/Pause button ( G / J ) to start program
playback.
< After program playback finishes, press the Play/Pause button
(y/J) to play the program again.
< Pressing the POWER button or the OPEN/CLOSE button (L)
causes the program content to be discarded.
< The shuffle function does not work during program playback.
< During program playback, tracks/files cannot be selected using
the Number buttons.
2 and 3 to program more tracks/files.
15