Warning: Always use the cables provided in the box. Use only the
supplied adaptor. Using other power adapter may damage the unit.
Note: Place the base unit within easy reach of the mains power socket.
Never try to lengthen the mains power cable. The base station needs
mains power for normal operation and the cordless handsets will not
work without it.
4.2
Installing and Charging the Rechargeable Batteries(see P3)
• Insert the 2 supplied batteries into the battery compartment,
observing the correct polarity (see markings inside battery
compartment).
Warning: Use only the supplied NiMH rechargeable batteries.
• Place the back cover over the back of the handset and press down
until it clicks into place.
• Place the handset on the base and charge for 15 hours before using
the handset for the first time.
>The handset will give a double beep when it is properly
placed on the base and the battery charging indicator
on the base lights up to indicate charging.
Note:
The handset may become warm when the batteries are being charged
or during prolonged periods of use. This is normal and does not
indicate a fault.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
5
SET THE HANDSET LANGUAGE
M
• Press
and
M
• Press
and
M
• Press
and
M
• Press
to confirm.
.
to select HS SETTINGS.
.
to select LANGUAGE.
.
to select the desired language.
5